Industrial highways pressure washer.
Chassis - Constructed from 70 x 70 R.S.A. fully welded with a ‘T’ frame drawbar, all fully hot dipped galvanised.
Axle/Suspension - Avonride rubber torsion beam axle fitted with 200 x 50 auto reverse brakes. 4 stud 5½“ pcd hubs
Wheels and Tyres - 2 no. 185 x 13 6 ply commercial van tyres on 5½” pcd 4 stud rims.
Coupling - Avonride auto reverse coupling fitted with 40mm eye or 50mm ball, break away cable and parking brake lever
Ancillary Equipment - Moulded mudguards, front telescopic jockey wheel, rear lighting board.
Tank
Elliptical in section, baffled & moulded from polyethylene & fitted with an 18” lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps.1 rear tap fitted , 2” bottom drain underneath rear of tank .Inner anti surge baffle.
Pump
Honda GX 160 Hand Start Petrol Engine driving a 140 Bar (2000psi),10 lpm piston pump c/w hand lance & 7m of hose stowed on bracket.
Finish
Tank moulded in yellow polyethylene. Chassis galvanised
To download product information click on the PDF icons below.
| Name |
Description |
Download PDF |
